User's Manual
RevisionHistory
Rev.1.2,Feb.2015 42/44
HardwareUser
Guide,DocumentNumber:N/A
SafetyApprovalConsiderations
This device has been safety approved as a component and is for
use only in complete equipment where the acceptability of the
combination is determined by the appropriate safety agencies.
When installed, consideration must be given to the following:
It must be installed into a compliant host device meeting the requirement of
UL/EN/IEC 60950-1 2nd edition including the general provisions of
enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure).
The device shall be supplied by a SELV source when installed in the end-
use equipment.
A heating test shall be considered in the end-use product for meeting the
requirement of UL/EN/IEC 60950-1 2nd edition.
INFORMATIONFOROEMsandHOSTINTEGRATORS
The guidelines described within this document are provided to
OEM integrators installing Intel® wireless adapters in
notebook and tablet PC host platforms. Adherence to these
requirements is necessary to meet the conditions of compliance
with FCC rules, including RF exposure. When all antenna type
and placement guidelines described herein are fulfilled the
Intel® wireless adapters may be incorporated into notebook
and tablet PC host platforms with no further restrictions. If any
of the guidelines described herein are not satisfied it may be
necessary for the OEM or integrator to perform additional
testing and/or obtain additional approval. The OEM or
integrator is responsible to determine the required host
regulatory testing and/or obtaining the required host approvals
for compliance.
Intel® wireless adapters are intended for OEMs and host integrators only.