User's Manual




RevisionHistory
Rev.1.2,Feb.2015 15/44
HardwareUser
Guide,DocumentNumber:N/A

2.1.2.2 StaticIPAddressConfiguration
 ThegivenexampleIPnumberatFigure12isforasimplifiedtestanddebugsetup,
seeError!Referencesourcenotfound.,wheretheoctaveorjavaclientrunsonthe
WinPCthatalsocarriesallnecessaryWindriversandisconnectedtotheDUT.The
ecm200driverrunsinasubnetthatisonlyvisiblefromthisPC.
 Thecompletesetup,seeError!Referencesourcenotfound.,consistsoftestPCs
thatwereprovidedtogetherwithrecommendedIPsettingsfortheecm200driver.
ThestaticroutesettingsweresettypicallyIT
systemwide.
 IncasetwoPCswereusedtorunthetests,atestPCwiththedriversandadesktop
PCthatcarriestheOctaveortheJavaclientastaticroutemustbesetatthedesktop
PC.Theexamplebelowhelpstofindproperstaticroute
settings:

testPCwithstaticIP:10.1.0.126
ecm200clientattestPCwithIP:172.16.126.1(clientoffsetsetto1)
runasrootatthePCwheretheOctaveisrunningon.
routeprint#readoutroutesettings
routeadd172.16.126.0mask255.255.255.010.1.0.126
 testtheconfiguration:
ping
172.16.126.1#responsefromtheecm200driver
ping172.16.126.2#responsefromthebootedLTE‐IPblock(L1CC)
 ReopentheNetworkConnectionPropertiesDialog.