User's Manual

Applications
70
Step 3: Registering a user
Register a user according to the procedures below.
1
On the Start screen, right-click any area and select All apps .
2
Select Manage Security Platform

User Settings .
3
When the initialization wizard appears, select an initialization
method

a drive

Next .
Back up the emergency recovery file to an external storage
device according to the instructions of the initialization
wizard to use the TPM security device more safely.
If
Not initialized pop-up message appears, select Ye s .
Step 2: Installing the solution
Install the TPM solution according to the procedures below.
This solution is provided only for models with Recovery
and the TPM solution.
1
Run Recovery and select System Software .
2
Select System Software Installation .
3
Select TPM Host SW

Install Now .
The
SW Update application will be launched.
If the system software media is supplied with the product,
install the application by using the system software media
(only when supplied.)
4
After the installation, select OK .
The computer restarts.