User's Manual

Basics
33
Entering text
Use the virtual Qwerty keyboard to enter text.
r
Text entry is not supported in some languages. To
enter text, change the input language to one of the
supported languages.
r
Enter text with the keyboard when using the computer
for a long time.
Changing the keyboard layout
To change the keyboard layout, touch and select one of the
following:
r
: Simplified Qwerty keyboard.
r
: Split Qwerty keyboard for entering text with two hands.
r
: Standard Qwerty keyboard.
2
Select Ye s when a pop-up appears.
3
Touch on the calibration screen.
r
appears sequentially from the upper-left to the lower-
right on the screen. Touch
each time it appears.
r
To return to the last calibration point, right-click or touch
and hold anywhere.
r
To close the calibration screen, press the Esc key.
4
When finishing calibrating and a pop-up appears, select Ye s .