User's Manual
Table Of Contents
- Use the Intel® PROSet/Wireless WiFi Connection Utility
- Contents
- Use the Intel® PROSet/Wireless WiFi Connection Utility
- Taskbar Icon
- Get Connected
- WiFi Networks List
- Connection Status Icons
- Network Properties
- Network Connection Details
- Intel® Wireless Troubleshooter
- Application Settings (Tools menu)
- Turn Wireless Radio On or Off
- Adapter Settings
- Advanced Statistics (Advanced menu)
- Profile Management
- Profile Wizard General Settings
- Wireless Network Overview
- Security Overview
- Personal Security
- Enterprise Security
- Using the Administrator Tool
- Intel® Wireless Troubleshooter (Tools menu)
- Regulatory Information
- Specifications
- Customer Support
- Warranty Information
- Glossary
AP Signal Strength
The strength of the signal received from the access
point, at the adapter. This value is given in milliwatts
(mW) and may actually be in the picowatts range. This
value varies, based on the distance between the AP
and the adapter, obstacles that may interfere with the
signal, and the power level at which the AP is
transmitting.
NOTE: This parameter is only visible when connected
to a Cisco Systems access point.
AP Noise Level
The radio frequency (RF) noise level present in the
environment that will tend to interfere with the signal
from the access point. RF noise comes from natural
and electrical sources.
NOTE: This parameter is only visible when connected
to a Cisco Systems access point.
Repair
Renews the IP Address. If you have trouble accessing
the network, verify if the IP address is valid. If it is
0.0.0.0 or 169.x.x.x then it is probably not valid. If
your network is set up for automatic network address
assignment, then click Repair and request a new IP
address.
Close Closes the page.
Help?
Provides help information for this page.
Back to Top
Back to Contents
Trademarks and Disclaimers