User's Manual
Table Of Contents
- Use the Intel® PROSet/Wireless WiFi Connection Utility
- Contents
- Use the Intel® PROSet/Wireless WiFi Connection Utility
- Taskbar Icon
- Get Connected
- WiFi Networks List
- Connection Status Icons
- Network Properties
- Network Connection Details
- Intel® Wireless Troubleshooter
- Application Settings (Tools menu)
- Turn Wireless Radio On or Off
- Adapter Settings
- Advanced Statistics (Advanced menu)
- Profile Management
- Profile Wizard General Settings
- Wireless Network Overview
- Security Overview
- Personal Security
- Enterprise Security
- Using the Administrator Tool
- Intel® Wireless Troubleshooter (Tools menu)
- Regulatory Information
- Specifications
- Customer Support
- Warranty Information
- Glossary
data encryption:
1. On the WiFi connection utility main window, double-click an infrastructure network
from the WiFi Networks list or select the network and click Connect.
2. If these are being transmitted, the Profile name and WiFi Network Name (SSID)
should display on the General Settings screen. Network (Infrastructure) should
be selected as the Operating Mode. Click Next to open the Security Settings.
3. Select Personal Security.
4. Security Settings: Select WPA2-Personal (AES-CCMP) to provide this level of
security in the small network or home environment. It uses a password, also called a
pre-shared key (PSK). The longer the password, the stronger the security of the
wireless network.
AES-CCMP (Advanced Encryption Standard - Counter CBC-MAC Protocol) is a
newer method for privacy protection of wireless transmissions specified in the
IEEE 802.11i standard. AES-CCMP provides a stronger encryption method than
TKIP. Choose AES-CCMP as the data encryption method whenever strong data
protection is important.
If your Wireless access point or router supports WPA2-Personal, then you
should enable it on the access point and provide a long, strong password. The
same password entered into the access point needs to be used on this
computer and all other wireless devices that access the wireless network.
NOTE: WPA-Personal and WPA2-Personal are interoperable.
5. Password: Wireless Security Password (Encryption Key): Enter a text phrase
(length is between eight and 63 characters). Verify that the network key used
matches the wireless access point key.
6. Click OK to return to the Profiles list.
Back to Top
Back to Contents
Trademarks and Disclaimers