User's Manual

Wireless Mode
Select which mode to use for connection to a
wireless network:
802.11a only: Connect the wireless WiFi
adapter to 802.11a networks only. Not
applicable for all adapters.
802.11b only: Connect the wireless WiFi
adapter to 802.11b networks only. Not
applicable for all adapters.
802.11g only: Connect the wireless WiFi
adapter to 802.11g networks only.
802.11a and 802.11g: Connect the WiFi
adapter to 802.11a and 802.11g networks
only. Not applicable for all adapters.
802.11b and 802.11g: Connect the WiFi
adapter to 802.11b and 802.11g networks
only. Not applicable for all adapters.
802.11a, 802.11b, and 802.11g: (Default)
- Connect to either 802.11a, 802.11b or
802.11g wireless networks. Not applicable for
all adapters.
NOTE: These wireless modes (Modulation type)
determine the discovered access points displayed in
the
WiFi Networks list
OK
Saves settings and returns to the previous page.
Cancel
Closes and cancels any changes.
Microsoft Windows* Advanced Options (Adapter Settings)
To access the Windows* XP Advanced options:
1. Start Windows and log on with administrative privileges.
2. From your desktop, right-click My Computer and click Properties.
3. Click the Hardware tab.
4. Click Device Manager.
5. Double-click Network adapters.
6. Right-click the name of the installed WiFi adapter that is in use.
7. Click Properties.
8. Select the Advanced tab.
9. Select the Property you want (for example, Mixed Mode Protection, Power
Management).
10. To select a new value or setting, click Use default value to clear the checkbox. Then