User's Manual
Table Of Contents
- Use the Intel® PROSet/Wireless WiFi Connection Utility
- Contents
- Use the Intel® PROSet/Wireless WiFi Connection Utility
- Taskbar Icon
- Get Connected
- WiFi Networks List
- Connection Status Icons
- Network Properties
- Network Connection Details
- Intel® Wireless Troubleshooter
- Application Settings (Tools menu)
- Turn Wireless Radio On or Off
- Adapter Settings
- Advanced Statistics (Advanced menu)
- Profile Management
- Profile Wizard General Settings
- Wireless Network Overview
- Security Overview
- Personal Security
- Enterprise Security
- Using the Administrator Tool
- Intel® Wireless Troubleshooter (Tools menu)
- Regulatory Information
- Specifications
- Customer Support
- Warranty Information
- Glossary
Error occurred because the GSM adapter was unexpectedly removed
Smart Card was unexpectedly removed
Authentication failed because timer expired
An administrator profile failed to authenticate
Administrator profile failed to authenticate due to an invalid certificate
Administrator profile did not receive an IP address
Did not receive an IP address
The WiFi adapter failed to get a valid IP address. The wireless security password or encryption key does not
match the one used by the access point. Other causes are: the wireless network requires a static IP address;
there is a problem with the DHCP server; or, a general network problem.
To clear this message:
● Reenter the wireless security password in the network security settings. See Personal Security.
● Restart the access point, router, computer, and DSL/cable modem.
● Verify the security configuration on the access point or wireless router. For assistance, contact your
access point or router manufacturer.
● Contact your network administrator for help to set up your wireless connection.
The ad hoc network is idle and no peers have joined the network
If you create an ad hoc network and no peers join that ad hoc network for two minutes, this alert notifies you
that the ad hoc network is idle.
This alert notification is enabled or disabled in the
Application Settings.
To clear this message:
1. From the Tools menu, click Application Settings.
2. Scroll down to locate Device to Device (ad hoc) Network Notification.
3. Clear Notify when no peers have joined the ad hoc network.
4. Click OK to save your settings and return to the WiFi connection utility main window.
The ad hoc network is idle and all peers have left the network
If you create or join an ad hoc network with other participants, this alert notifies you when any or all
participants have left the ad hoc network.
This alert notification is set in the
Application Settings.
To clear this message:
1. From the Tools menu, click Application Settings.
2. Scroll down to locate Device to Device (ad hoc) Network Notification.