User's Manual

4. Click OK.
5. Select the profile on the WiFi Networks list.
6. Click Connect. When prompted, enter the user name, domain and OTP.
7. Click OK. You are asked to verify your log in information.
MS-CHAP-V2: This parameter specifies the authentication protocol operating over the PEAP tunnel.
1. User Credentials: Select one of the following options:
Use Windows logon, Prompt each time I
connect, or Use the following. For Persistent profiles, the options are Use the following or Use
secured password.
2. Click Next to open the PEAP Server settings.
TLS: Transport Layer Security authentication is a two-way authentication method that exclusively uses
digital certificates to verify the identity of a client and a server.
1. Obtain and install a client certificate. See
Create a Windows* XP Profile for TLS authentication or
consult your system administrator.
2. Select one of the following to obtain a certificate:
Use my smart card, Use the certificate issued to
this computer, or Use a user certificate on this computer. If this is a Persistent, Administrator
profile, only
Use the certificate issued to this computer is available.
3. Click Next to open the PEAP Server settings.
Step 2 of 2: PEAP Server