User's Manual

IEEE Std. 802.11g compliant Standard on Wireless LAN
IEEE Std. 802.11a compliant Standard on Wireless LAN
IEEE Std. 802.11n draft 2.0 compliant on Wireless LAN
Wireless Fidelity certification, as defined by the Wi-Fi Alliance
The Wireless Adapter and Your Health
The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy
emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless
devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety
standards and recommendations. These standards and recommendations reflect the consensus of the scientific
community and result from deliberations of panels and committees of scientists who continually review and
interpret the extensive research literature. In some situations or environments, the use of the wireless adapter
may be restricted by the proprietor of the building or responsible representatives of the applicable organization.
Examples of such situations may include:
Using the wireless adapter on board airplanes, or
Using the wireless adapter in any other environment where the risk of interference with other devices or
services is perceived or identified as being harmful.
If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or
environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you
turn it on.
WEEE
Regulatory Information
Information for the OEMs and Integrators
The following statement must be included with all versions of this document supplied to an OEM or integrator, but
should not be distributed to the end user.
This device is intended for OEM integrators only.
Please see the full Grant of Equipment document for other restrictions.
This device must be operated and used with a locally approved access point.
Any changes or modifications to this product not expressly approved by Intel could void the user's
authorization to operate the product.
The requirements described within this document are provided to OEM integrators installing Intel® wireless
adapters in host platforms. Strict adherence to these requirements is necessary to meet the conditions of
compliance with FCC and Industry Canada rules, including RF exposure. When all requirements described herein
are fulfilled, the Intel® wireless adapters may be installed in host platforms with no further restrictions when
incorporating into host systems. If any of the requirements herein are not satisfied, the OEM integrator is
responsible to conduct the necessary system level regulatory testing and/or obtain the required approvals for
compliance.
Antenna Type and Gains
Only antennas of the same type and with equal or less gains as shown below may be used with the Intel®
wireless adapters. Other types of antennas and/or higher gain antennas are not authorized.
Antenna Type Antenna Location 2.4GHz 2.6GHz 5.2GHz 5.5GHz 5.7GHz