User's Manual
Table Of Contents
- Welcome
- Getting to know your computer
- Connecting to a network
- Navigating using the keyboard, touch gestures and pointing devices
- Multimedia
- Power management
- Shutting down the computer
- Setting power options
- Using power-saving states
- Using battery power
- Finding additional battery information
- Displaying the remaining battery charge
- Maximizing battery discharge time
- Managing low battery levels
- Inserting or removing the battery
- Conserving battery power
- Storing a user-replaceable battery
- Disposing of a user-replaceable battery
- Replacing a user-replaceable battery
- Using external AC power
- External cards and devices
- Drives
- Security
- Maintenance
- Backup and recovery
- Computer Setup (BIOS) and Advanced System Diagnostics
- Support
- Specifications
- Traveling with the computer
- Troubleshooting
- Electrostatic discharge
- Index
To remove the service door:
1. Remove the battery (see
Inserting or removing the battery on page 40).
2. With the service bay towards you, remove the 3 captive screws at the center of the unit and the
2 screws at the edge of the unit (1). The 2 screws at the front of the unit have rubber covers
which will need to be removed before the screws can be accessed. Then remove the 2 screws in
the middle of the service cover (2).
3. Before progressing, you may need to remove the micro SD card enclosure. Then slide the
service door toward the front of the computer (3) and lift (4) to remove the cover.
50 Chapter 8 Drives