User's Manual

8.
Remove the card.
9.
Align the contact edge of the new Wireless WAN Card with the corresponding socket contact of the
computer.
10.
Pivot the card until you can snap it into place by pressing the upper side of the connectors; then secure the
card with the two screws. Connect the cables to the new card.
Note:
Depending on the system configuration of your computer, the card may have only one
connector.
11.
Reinstall the palm rest
.
12.
Reinstall the keyboard
.
13.
Reinstall the battery
.
14.
Turn the computer over again. Connect the AC adapter and cables to the computer; then turn it on.
2/2 ページInstalling and replacing the PCI Express Mini Card for wireless WAN connection
2008/06/11file://C:\TamaTemp\replwan.htm\replwan.htm