User's Manual

● IEEE Std. 802.11n draft 2.0 compliant on Wireless LAN
● IEEE 802.16e-2005 Wave 2 compliant
● Wireless Fidelity certification, as defined by the Wi-Fi Alliance
● WiMAX certification as defined by the WiMAX Forum
The Intel® WiMAX/WiFi Link 5150 or Intel® WiMAX/WiFi Link 5350 adapter, and
your health
The adapter, like other radio devices, emits radio frequency electromagnetic energy. The
level of energy emitted by the adapter, however, is less than the electromagnetic energy
emitted by other wireless devices such as mobile phones. The adapter operates within the
guidelines found in radio frequency safety standards and recommendations. These standards
and recommendations reflect the consensus of the scientific community and result from
deliberations of panels and committees of scientists who continually review and interpret the
extensive research literature. In some situations or environments, the use of the adapter
may be restricted by the proprietor of the building or responsible representatives of the
applicable organization. Examples of such situations may include:
● Using the adapter equipment on board airplanes, or
● Using the adapter equipment in any other environment where the risk of interference
with other devices or services is perceived or identified as being harmful.
If you are uncertain of the policy that applies to the use of wireless devices in a specific
organization or environment (an airport, for example), you are encouraged to ask for
authorization to use the adapter before you turn it on.
Regulatory information
Information for the OEMs and Integrators
The following statement must be included with all versions of this document supplied to an
OEM or integrator, but should not be distributed to the end user.
● This device is intended for OEM integrators only.
● Please See the full Grant of Equipment document for other restrictions.
● This device must be operated and used with a locally approved access point.
Information To Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to
the end user of the product or system incorporating an adapter in compliance with local
regulations. Host system must be labeled with "Contains FCC ID: PD9533ANXM", FCC ID
displayed on label.