User's Guide

Coverage: Set the adapter to the

maximum transmit power level. Select

for maximum performance and range in

environments with limited additional

radio devices.

If you select No change, then this setting will not be

changed at the user's computer.

NOTE: The optimal setting is for a user to always set

the transmit power at the lowest possible level still

compatible with the quality of their communication.

This allows the maximum number of wireless devices

to operate in dense areas and reduce interference

with other devices that this radio shares radio

spectrum with.

NOTE: This setting takes effect when either Network

(Infrastructure) or Device to Device (ad hoc) mode is

used.

Wireless Mode

Select which mode to use for connection to a wireless

network:

● 802.11a (only): Connect the wireless adapter

to 802.11a networks only.

● 802.11b (only): Connect the wireless adapter

to 802.11b networks only.

● 802.11g (only): Connect the wireless adapter

to 802.11g networks only.

● 802.11a and 802.11g: Connect the wireless

adapter to 802.11a and 802.11g networks only.

● 802.11b and 802.11g: Connect the wireless

adapter to 802.11b and 802.11g networks only.

● 802.11a, 802.11b, and 802.11g: (Default) -

Connect to either 802.11a, 802.11b or 802.11g

wireless networks.

NOTE: These wireless modes (Modulation types)

determine the discovered access points displayed in

the

WiFi Networks list.

Back to Contents