User's Manual

name that belongs to this domain or to one of its subdomains (for
example, zeelans.com, where the server is blueberry.zeelans.com).
NOTE: These parameters should be obtained from the administrator.
Notes about Certificates: The specified identity should match the Issued to
identity in the certificate and should be registered on the authentication server (for
example, RADIUS server) that is used by the authenticator. Your certificate must be
valid with respect to the authentication server. This requirement depends on the
authentication server and generally means that the authentication server must know
the issuer of your certificate as a Certificate Authority. Use the same user name you
used to log in when the certificate was installed.
2. Click OK. The profile is added to the Profiles list.
3. Click the new profile at the end of the Profiles list. Use the up and down arrows to change
the priority of the new profile.
4. Click Connect to connect to the selected wireless network.
If you did not select Use Windows logon on the Security Settings page and also
did not configure user credentials, no credentials are saved for this profile. Please
enter your credentials to authenticate to the network.
5. Click OK to close Intel PROSet/Wireless.
PEAP-TLS Certificate Auto Enrollment
In the Application Settings (Advanced Settings), select Intel(R) PROSet TLS Certificate
Rejected Warning if you want a warning issued when a PEAP-TLS certificate is rejected.When
a certificate has an invalid field expiration date, you are notified that you must take one of the
following actions:A potential authentication problem for profile <profile name> has
been detected. The expiration date in the associated certificate may be invalid.
Choose one of the following options:
Control
Description
Continue with current parameters. Continue with the current certificate.
Update certificate manually. The Select Certificate page opens for you to
choose another certificate.
Update certificate automatically based on
the certificates in the local store.
This option is enabled only when the local store
holds one or more certificates for which the
"issued to" and "issued by" fields match the
current certificate and for which the "expiration
date" has not expired. If you choose this option,
the application selects the first valid certificate.
Log off to obtain certificate during log on
process (this does not update the profile
and only applies to certificates configured
for auto enrollment).
Logs off the user, who must obtain a proper
certificate during the next log on process. The
profile must be updated to select the new
certificate.