User's Manual

PEAP tunnel.
1. User Credentials: Select one of the following options:
■ Use Windows Logon: Allows the 802.1x credentials to match your
Windows user name and password. Before connection, you are prompted
for your Windows logon credentials.
■ Prompt each time I connect: Prompts for user name and password
every time you log onto the network.
■ Use the following user name and password: The user name and
password are securely (encrypted) saved in the profile.
■ User Name: This user name must match the user name that is set
in the authentication server.
■ Domain: Name of the domain on the authentication server. The
server name identifies a domain or one of its subdomains (for
example, zeelans.com, where the server is blueberry.zeelans.com).
NOTE: Contact your administrator to obtain the domain name.
■ Password: This password must match the password that is set in
the authentication server. The entered password characters display
as asterisks.
■ Confirm Password: Reenter the user password.
NOTE:This option is unavailable if Pre-Logon Connect is not selected during
installation of the Intel PROSet/Wireless software. Refer to
Install or Uninstall
the Single Sign On Feature.
TLS: Transport Layer Security authentication is a two-way authentication method that
exclusively uses digital certificates to verify the identity of a client and a server.
1. Obtain and install a client certificate, refer to
Set up the Client for TLS authentication
or consult your system administrator.
2. Select one of the following to obtain a certificate:
■ Use my smart card: Select if the certificate resides on a smart card.
■ Use the certificate issued to this computer: Click Select to choose a
certificate that resides in the machine store.
■ Use a user certificate on this computer. Click Select to choose a certificate
that resides on this computer.
3. Click Next.
Step 2 of 2: PEAP Server