User's Manual

4. Click OK to export the selected profile. You are notified: Successfully exported
selected profiles to the destination folder: C:\.
To select multiple profiles:
1. Use your mouse to highlight a profile.
2. Press Ctrl.
3. Click each profile that you want selected. Follow the instructions from Step 2 above
to export multiple profiles.
Import Profiles into the Profiles List
To import profiles manually:
1. Click Import on the Profiles page.
2. Select the profile files to import.
3. Click Import.
4. You are notified that the profile has been successfully imported.
5. Click OK.
6. Click Close to return to the Intel PROSet/Wireless Main Window.
An administrator can set profiles to be imported automatically into the Profiles list. Intel
PROSet/Wireless monitors the import folder on your hard disk for new profile files. Only
profiles that have been enabled through Enable Auto-Import in the
Advanced Settings
are automatically imported. If a profile of the same name already exists in the Profiles
list, you are notified to either reject the imported profile or accept it. If accepted, the
existing profile is replaced.
All imported user-based profiles are placed at the bottom of the Profiles List.
Password Protected Profiles
Import and export password-protected user-based profiles automatically to remote
systems. If a profile is password protected, the assigned password must be entered
before it can be edited. Refer to
Set a Profile Password for more information.