User's Manual

has been selected.

Server name must match the specified entry

exactly: When selected, the server name must match

exactly the server name found on the certificate. The

server name should include the complete domain

name (for example, Servername.Domain name).

Domain name must end with the specified entry:

When selected, the server name identifies a domain,

and the certificate must have a server name that

belongs to this domain or to one of its subdomains (for

example, zeelans.com, where the server is

blueberry.zeelans.com). NOTE: These parameters

should be obtained from the administrator.

Notes about Certificates: The specified identity should match the

Issued to identity in the certificate and should be registered on the

authentication server (for example, RADIUS server) that is used by

the authenticator. Your certificate must be valid with respect to the

authentication server. This requirement depends on the authentication

server and generally means that the authentication server must know

the issuer of your certificate as a Certificate Authority. Use the same

user name you used to log in when the certificate was installed.

2. Click OK. The profile is added to the Profiles list.

3. Click the new profile at the end of the Profiles list. Use the up and down

arrows to change the priority of the new profile.

4. Click Connect to connect to the selected wireless network.

5. Click OK to close Intel PROSet/Wireless.

Back to Contents

Trademarks and Disclaimers