User's Manual

Supported Data
Rates
Rates at which the wireless adapter can send and receive data. Displays the
speed in Mbps for the frequency being used.
● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54
● 802.11b: 1, 2, 5.5, and 11
● 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54
Radio Frequency
Displays the frequency of the current wireless connection.
● 802.11a: 5.15 GHz to 5.85 GHz
● 802.11b/g: 2.400 GHz to 2.4835 GHz (dependent on country)
Channel Number
Displays the transmit and receive channel.
Network
Authentication
Displays Open, Shared, WPA-Personal and WPA2-Personal modes, WPA-
Enterprise, and WPA2-Enterprise. Displays the 802.11 authentication used by
the currently used profile. Refer to
Security Overview for more information.
Data Encryption Displays None, WEP, TKIP or AES-CCMP. Refer to
Security Overview for more
information.
802.1x
Authentication
Type
Displays None, MD5, EAP-SIM, TLS, TTLS, PEAP, LEAP, or EAP-FAST. Refer to
Security Ovewrview for more information.
802.1x
Authentication
Protocol
Displays None,
PAP, MD5, GTC, CHAP, MS-CHAP, MS-CHAP-V2 or TLS. Refer to
Security Overview for more information.
CCX Version
Version of the Cisco Compatible Extensions on this wireless connection.
Current TX
Power
Cisco Compatible Extensions Power Levels.
Supported Power
Levels
1.0, 5.0, 20.0, 31.6, 50.1 mW
Access Point MAC
Address
The Media Access Control (MAC) address for the associated access point.
Mandatory
Access Point
Displays None, if not enabled. If enabled, from the
Mandatory Access Point
setting, the access point MAC address is displayed. This option directs the
wireless adapter to connect to an access point that uses a specific MAC address
(48-bit 12 hexadecimal digits, for example, 00:06:25:0E:9D:84).
Repair
Renews the IP Address. If you have trouble accessing the network, verify if the
IP address is valid. If it is 0.0.0.0 or 169.x.x.x, then it is probably not valid. If
your network is setup for automatic network address assignment, then click
Repair and request a new IP address.
Close
Closes the page.
Help?
Provides help information for this page.
Profile Management
The Profiles List displays the current user profiles in the order that they are to be applied. Use the up
and down arrows to arrange profiles in a specific order to automatically connect to a wireless