User's Manual

6. Click Enterprise Security.
7. Network Authentication: Select Open (Recommended).
8. Data Encryption: Select WEP.
9. 802.1x Enabled: Selected.
10. Authentication Type: Select TLS.
Step 1 of 2: TLS User
1. Obtain and install a client certificate.
2. Select one of the following to obtain a certificate:
● Use my smart card: Select if the certificate resides on a smart
card.
● Use the certificate issued to this computer: Click Select to
choose a certificate that resides in the machine store.
● Use a user certificate on this computer. Click Select to
choose a certificate that resides on this computer.
3. Click Next.
Step 2 of 2: TLS Server
1. Select one of the following options:
■ Validate Server Certificate: Select to verify the server
certificate.
Certificate Issuer: The server certificate received
during TLS message exchange must be issued by this
certificate authority (CA). Trusted intermediate
certificate authorities and root authorities whose
certificates exist in the system store are available for
selection. If Any Trusted CA is selected, any CA in the
list is acceptable. Click Any Trusted CA as the default
or select a certificate issuer from the list.
■ Specify Server or Certificate Name:
Server or Certificate Name: Enter the server name.
The server name or domain to which the server
belongs, depends on which of the two options below