User's Manual

1-3: Allow Roaming
2: Default: Balances between not
roaming and performance. Click Use
default value to select.
4: Maximum Roaming.
Throughput Enhancement
Change the value of the Packet Burst Control.
● Enable: Select to enable throughput
enhancement.
● Disable: (Default) - Select to disable
throughput enhancement.
Transmit Power
If you decrease the transmit power, you reduce
the radio coverage.
Default Setting: Highest power setting
Values:
TX Minimum: Lowest Minimum
Coverage: Set the adapter to a
lowest transmit power. Enable you to
expand the number of coverage areas
or confine a coverage area. Reduce
the coverage area in high traffic areas
to improve overall transmission
quality and avoid congestion and
interference with other devices.
TX Level 1
TX Level 2
TX Level 3
TX Maximum: Highest Maximum
Coverage: Set the adapter to a
maximum transmit power level.
Select for maximum performance and
range in environments with limited
additional radio devices.
NOTE: The optimal setting is for a user to
always set the transmit power at the lowest