User's Manual

● Show device to device application settings
● Hide device to device application settings.
To remove the Device to device (Ad hoc)
operating mode from the Profile Wizard General
Settings, select both Disable device to device
networking and Hide device to device
application settings. This prevents a user
from creating profiles that support Device to
device (Ad hoc) network.
Import and Export
Select to import to or export profiles from a
user’s computer. Enable permits auto import of
user profiles when copied to an auto import
folder.
Message On Radio Toggle
Enables a third-party application to notify a
user that the Intel PROSet/Wireless radio is
either on or off.
Microsoft Windows XP
Coexistence
Select Enable Microsoft Wireless Zero
Configuration and Intel PROSet/Wireless
to coexist on this system.
Enable this option to allow Microsoft Wireless
Zero Configuration and Intel PROSet/Wireless
to exist together on this system. When you
select this option, you prevent Microsoft
Windows XP Wireless Zero Configuration
Service from being disabled when Intel
PROset/Wireless is enabled.
Pre-Logon Cisco Mode
Enable Cisco Mode during a pre-logon
connection.
Cisco access points have the capability to
support multiple wireless network names
(SSIDs) but only broadcast one. In order to
connect to such an access point, an attempt is
made to connect with each profile. This is
referred to as Cisco Mode.
NOTE: The pre-logon connection may take
longer to connect.