User's Manual

Intel® Wireless Adapter
Minimum
required
antenna-to-
user
separation
distance (mm)
Intel® Centrino® Wireless-N + WiMAX 6150 18
Intel® Centrino® Advanced-N + WiMAX 6250 17
Simultaneous transmission of Intel® Wireless Adapters with Other Integrated or Plug-In
Transmitters
Based upon FCC Knowledge Database publication number 616217 D03 Supplement
https://fjallfoss.fcc.gov/kdb/GetAttachment.html?id=30257 , when there are multiple
transmitting devices installed in a host device, an RF exposure transmitting assessment shall be
performed to determine the necessary application and test requirements. OEM integrators must
identify all possible combinations of simultaneous transmission configurations for all
transmitters and antennas installed in the host system. This includes transmitters installed in the
host as mobile devices (>20cm separation from user) and portable devices (<20cm separation
from user). OEM integrators should consult the actual FCC KDB 616217 D03 Supplement
document for all details in making this assessment to determine if any additional requirements
for testing or FCC approval is necessary.
Intel WiFi Adapters, 802.11n Compliant
The information in this section applies to the following products:
 Intel® Centrino® Wireless-N 100
 Intel® Centrino® Wireless-N 105
 Intel® Centrino® Wireless-N 130
 Intel® Centrino® Wireless-N 135
 Intel® WiFi Link 1000
 Intel® Centrino® Wireless-N 1030
 Intel® Centrino® Wireless-N 2200
 Intel® Centrino® Wireless-N 2230
 Intel® Centrino® Advanced-N 6200
 Intel® Centrino® Advanced-N 6205
 Intel® Centrino® Advanced-N 6230
 Intel® Centrino® Advanced-N 6235
 Intel® Centrino® Ultimate-N 6300
See Specifications for wireless adapter specifications.
The following information is provided: