User Manual

Installation Guide 3–1
3
Installing Software
Preparing for Installation
Before installing the software, make sure the hardware and
drivers are installed. Refer to Chapter 2, “Installing Hardware and
Drivers,” for more information.
If you have previously installed a wireless LAN device, such as a
PC Card, you must uninstall the wireless LAN drivers and
software according to the device manufacturer’s instructions.
For each computer that you want to add to the wireless LAN,
follow the instructions in the sections that apply to your
computer’s operating system.
✎
After completing the installation, refer to the Microsoft Windows
operating system manual, included with your computer, for
information on sharing network resources, such as printers.
Installing Software
1. After the hardware and drivers have been installed, select
Start > Run, enter
D:\setup.exe
(where
D:\
is your CD drive),
and select OK. The Welcome dialog box is displayed.
2. Carefully read the information in the Welcome dialog box
and then select Next.
3. Select Yes to accept the Software License Agreement.
225839g1.book Page 1 Wednesday, June 13, 2001 10:45 AM