User Manual

2–4 Installation Guide
Installing Hardware and Drivers
10. Open the computer and turn it on. After the operating system
is fully operational, Windows should find a new USB device.
If Windows does not find the device, press
Fn+F2
to turn on
the MultiPort Module. At this point the New Hardware
Wizard should start and guide you through the process of
installing the drivers for the module.
✎
The drivers are located in the root directory of the CD (for
example, if
D:\
is your CD drive, the drivers are located in
D:\
).
11. Follow the on-screen directions to find and install the drivers.
Several dialog boxes are displayed to complete the driver
installation and you may also be prompted for your original
Windows installation disk.
12. For computers running Windows 98 or Windows Me:
After the drivers are installed, a System Settings Change
dialog box is displayed and the operating system prompts you
to restart the computer. Select Yes to accept.
225839g1.book Page 4 Wednesday, June 13, 2001 10:45 AM