User's Manual

WiGig Application User Manual for Windows 10*
Intel
®
Wireless Gigabit v2.0
User Guide October 2015
38 Intel Confidential Document Number: 537178-3.3
client and complete the docking procedure. See Section 3.1.6 for more details. Ability to
wake up the client from the dock is vendor specific and is configured in the BIOS.
You can disable auto-connect by deselecting the Connect automatically check box while connected, as
shown in Figure 4-10.
Figure 4-10 Disabling the auto-connect setting
You can only change a dock between automatic and manual connection when you are actively
connected to the dock.
Once auto-connect is disabled, the client will no longer connect automatically and you will have to
manually select the dock from the client, as described in Section 3.1.5.
4.1.5 Manually connecting to a dock
When the dock is defined as manual, the connection is done similarly to the connection flow that was
describe above without the stage where the user is requested to push the button.