User's Manual
Table Of Contents
Changes or modification to Intel® wireless adapters by OEMs, integrators or other
third parties is not permitted. Any changes or modification to Intel® wireless
adapters by OEMs, integrators or other third parties will void authorization to operate
the adapter.
Simultaneous Transmission of Intel® Wireless Adapters with Other
Integrated or Plug-In Transmitters
Based upon FCC Knowledge Database publication number 616217
https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?id=33240&switch=P
, when
there are multiple transmitting devices installed in a host device, an RF exposure
transmitting assessment shall be performed to determine the necessary application and test
requirements. OEM integrators must identify all possible combinations of simultaneous
transmission configurations for all transmitters and antennas installed in the host system.
This includes transmitters installed in the host as mobile devices (>20 cm separation from
user) and portable devices (<20 cm separation from user). OEM integrators should consult
the actual FCC KDB 616217 document for all details in making this assessment to determine
if any additional requirements for testing or FCC approval is necessary.
Information To Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to
the end user of the product or system incorporating the Intel® wireless adapter, in
compliance with local regulations. Host system must be labeled with "Contains FCC ID:
XXXXXXXX", FCC ID displayed on label.
The Intel® wireless adapter must be installed and used in strict accordance with the
manufacturer's instructions as described in the user documentation that comes with the
product. Intel Corporation is not responsible for any radio or television interference caused
by unauthorized modification of the devices included with the wireless adapter kit or the
substitution or attachment of connecting cables and equipment other than that specified by
Intel Corporation. The correction of interference caused by such unauthorized modification,
substitution or attachment is the responsibility of the user. Intel Corporation and authorized
resellers or distributors are not liable for any damage or violation of government regulations
that may arise from the user failing to comply with these guidelines.