User's Manual

WiGig Application User Manual
1. General Info
a. Dock Name: the name that appears in the docks list in the CU application.
b. Check for Firmware Update (Not supported in this release): check if an updated FW
version is available for the dock.
2. Pairing
a. Always prompt devices to pair to this dock: The dock will force pairing each time a device is
connecting
b. Manually connect: when checked the client has to manually connect (using the CU) with this
dock each time.
This setting is useful for public docks (for example in airports), to prevent a situation where
a NB that connected to the dock now automatically connects (unintentionally) and prevents
other devices from connecting.
c. Preferred Channel: the preferred channel to work on (Automatic, 1, 2, 3 or 4). The default is
Automatic, the device will choose the relevant channel based on the allowed channels (under
regulation constraints). This information is burnt in the OTP.
3. Password
Prevents non-authorized users from changing dock settings.
4.5 Disconnection
4.5.1 Managed undocking
The user can disconnect from the dock through the following steps:
1. Press the FUN_BUTTON on the dock for more than two seconds (long press).
Intel
®
Maple Peak July 2014
User Guide Document Number: 537178-2.1
20 Intel Confidential