User's Manual
Table Of Contents
- Intel(R) PROSet/Wireless WiFi Connection Utility User's Guide
- Use the Intel(R) PROSet/Wireless WiFi Connection Utility
- Main Window
- Taskbar Icon and Menu Commands
- Connection Status Icons
- Wireless Network Overview
- Connect to a WiFi Network
- Network Connection Details
- Network Properties
- Personal Security
- Use Wi-Fi Protected Setup*
- Turn Wireless Radio On or Off
- Application Settings (Tools menu)
- Administrator Tool
- Adapter Settings
- Advanced Statistics (Advanced menu)
- Exclude List Management
- Profile Management
- Profile Wizard General Settings
- Security Overview
- Enterprise Security
- Application Settings (Administrator Tool)
- Administrator Password
- Advanced Settings
- Set up Profile Security
- Configure Profiles for Network (Infrastructure) Operating Mode
- Administrator Tool Settings
- Intel(R) Wireless Troubleshooter (Tools menu)
- Manual Diagnostics Tool
- Wireless Event Viewer
- Regulatory Information
- Specifications
- Customer Support
- Warranty Information
- Glossary
Use the following steps to resolve this error:
1. Double-click the Taskbar icon to open the WiFi connection utility.
2. Click Profiles on the WiFi connection utility main window.
3. Select the associated or last-used profile from the Profiles list.
4. Click Properties to open the General Settings.
5. Click Next to open the Security Settings.
6. Verify that Enable 802.1X is selected.
7. Verify that the correct authentication type is selected.
8. Enter the required security information.
9. Click OK. The profile is now reapplied. The WiFi connection utility attempts to connect
to the wireless network.
Incorrect PIN for retrieving certificate: Reenter PIN
The certificate retrieval failed because of an incorrect PIN.
Recommended action: Enter the correct PIN.
Error occurred because the GSM adapter was unexpectedly removed
This error occurs when the GSM adapter is not fully inserted or is unexpectedly removed
from the mobile station.
Use the following steps to resolve this error:
1. Reinsert the GSM adapter.
2. Double-click the Intel PROSet/Wireless WiFi Software icon at the bottom right of
the screen.
3. Select the associated or last-used profile from the profiles list.
4. Click Connect. The profile is now re-applied. The WiFi connection utility attempts to
connect to the wireless network.
Smart Card was unexpectedly removed
This error occurred because the Smart Card was unexpectedly removed.