User's Manual
Table Of Contents
- Intel(R) PROSet/Wireless WiFi Connection Utility User's Guide
- Use the Intel(R) PROSet/Wireless WiFi Connection Utility
- Main Window
- Taskbar Icon and Menu Commands
- Connection Status Icons
- Wireless Network Overview
- Connect to a WiFi Network
- Network Connection Details
- Network Properties
- Personal Security
- Use Wi-Fi Protected Setup*
- Turn Wireless Radio On or Off
- Application Settings (Tools menu)
- Administrator Tool
- Adapter Settings
- Advanced Statistics (Advanced menu)
- Exclude List Management
- Profile Management
- Profile Wizard General Settings
- Security Overview
- Enterprise Security
- Application Settings (Administrator Tool)
- Administrator Password
- Advanced Settings
- Set up Profile Security
- Configure Profiles for Network (Infrastructure) Operating Mode
- Administrator Tool Settings
- Intel(R) Wireless Troubleshooter (Tools menu)
- Manual Diagnostics Tool
- Wireless Event Viewer
- Regulatory Information
- Specifications
- Customer Support
- Warranty Information
- Glossary
AP Signal Strength
The strength of the signal received from the access
point, at the adapter. This value is given in milliwatts
(mW) and may actually be in the picowatts range. This
value varies, based on the distance between the AP
and the adapter, obstacles that may interfere with the
signal, and the power level at which the AP is
transmitting.
NOTE: This parameter is only visible when connected
to a Cisco Systems access point.
AP Noise Level
The radio frequency (RF) noise level present in the
environment that will tend to interfere with the signal
from the access point. RF noise comes from natural
and electrical sources.
NOTE: This parameter is only visible when connected
to a Cisco Systems access point.
Repair
Renews the IP Address. If you have trouble accessing
the network, verify if the IP address is valid. If it is
0.0.0.0 or 169.x.x.x then it is probably not valid. If
your network is set up for automatic network address
assignment, then click Repair and request a new IP
address.
Close Closes the page.
Help?
Provides help information for this page.
Back to Top
Back to Contents
Trademarks and Disclaimers