Owner`s manual

Operation
- 10 -
Keypad Program Tone Setting
When a key is pressed, a beep tone is heard to confirm your command. The user may enable or disable this keypad
program tone.
1. Press the MENU (7) key several times, until the keypad tone icon (I) will blink on the LCD display (4).
2. Press the UP (8) or DOWN (9) keys to set the desired selection on (keypad tone enabled) or oF (keypad tone disabled).
3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7)
key to move to the next function.
4. When the Keypad tone is enabled, the Keypad tone icon (I) appears on the LCD display.
Roger Beep Tone Setting
The radio is equipped with a user selectable Roger Beep Tone feature, which enables you to send a Beep Tone at the
end of each transmission after every release of the PTT (13) key. This will prompt any receiving unit that your
transmission has ended. To enable or disable this function, please proceed as follows :
1. Press the MENU (7) key several times, until the Roger Beep tone icon (D) will blink on the LCD display (4).
2. Press the UP (8) or DOWN (9) keys to set the desired selection on (Roger Beep tone enabled) or oF (Roger
Beep tone disabled).
3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7)
key to move to the next function.
4. When the Roger Beep tone is enabled, the tone icon (D) appears on the LCD display.
Call Tone Setting
The radio is equipped with 3 user selectable Call tone melodies. To set the desired Call tone melody, please proceed
as follows :
1. Press the MENU (7) key several times, until the CA (L) indication and melody number (H) will blink on the LCD
display (4).
2. Press the UP (8) or DOWN (9) keys to set the desired melody (01-02-03).
3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7)
key to move to the next function.
4. Press the CALL key (6) to transmit the Call Tone Melody.
Dual Watch Setting
The radio is equipped with a Dual Watch function that allows to monitor 2 differents channels / CTCSS codes
combinations. To set the Dual Watch function, please proceed as follows :
1. Select the first channel to be monitored.
2. Press the MENU (7) key several time until the oF (L) icon (function disabled) and the DW (C) icon will blink on
the LCD display (4).
3. Press the UP (8) or DOWN (9) keys to select the second channel to be monitored between the 8 PMR and the
69 LPD available channels.
4. Press PTT (13) or CALL (6) keys to confirm the selection and use the UP (8) or DOWN (9) keys to select the
desired CTCSS code number between the 38 available codes. Selecting the CTCSS code 0F will disable the
CTCSS feature.
English