Owner`s manual

Operation
- 9 -
3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7)
key to move to the next function.
Selecting a CTCSS code of OF will disable the CTCSS feature. To communicate between two or more radios, both
the channel and CTCSS code selections must be the same. To communicate with other models and brands of radios,
the actual radio frequency and CTCSS frequency must be matched. The frequency chart and CTCSS Code chart are
included to help with this selection.
VOX (Handsfree use) Function
Your radio is equipped with a user selectable Voice Operated Transmitter function (VOX), that is used for automatic
voice transmission (handsfree use or baby room monitor use). In this mode, transmission is automatically initiated by
speaking into the microphone (5) and there is no need to push the PTT (13). To enable the VOX function, please
proceed as follows :
1. Press the MENU (7) key several times, until the VOX icon (A) blinks on the LCD display (4).
2. Press the UP (8) or DOWN (9) keys to select the desired level of sensitivity (level 1 or level 2) or to disactivate
the VOX (OF). The VOX level 2 indicates the highest VOX sensitivity. When VOX feature is on, the VOX icon (A)
will appear on the LCD display.
3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7)
key to move to the next function.
Transmitter RF Power Setting
Your radio has a HI/LOW Power selection function to set the TX Power for PMR Band. This function is very convenient
to reduce the current drain and extend battery life when communicating within short distance. To select the output
power on the PMR Band :
1. Press the MENU (7) key several times, until the Pr (H) indication blinks on the LCD display (4).
2. Press the UP (8) or DOWN (9) keys to select the desired power level, HI (high power) or LOW (low power).
On the LCD display will appear the HI (G) icon or LOW (F) icon.
3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7)
key to move to the next function.
Note : this function is available only on the 8 PMR channels.
No Freq. (Hz)
OF
CTCSS OFF
01 67,0
02 71,9
03 74,4
04 77,0
05 79,7
06 82,5
07 85,4
No Freq. (Hz)
08 88,5
09 91,5
10 94,8
11 97,4
12 100,0
13 103,5
14 107,2
15 110,9
No Freq. (Hz)
16 114,8
17 118,8
18 123,0
19 127,3
20 131,8
21 136,5
22 141,3
23 146,2
No Freq. (Hz)
24 151,4
25 156,7
26 162,2
27 167,9
28 173,8
29 179,9
30 186,2
31 192,8
No Freq. (Hz)
32 203,5
33 210,7
34 218,1
35 225,7
36 233,6
37 241,8
38 250,3
--
CTCSS - TONE FREQUENCY CHART
English