Instruction manual

Do not place the radio in excessively dusty areas, humid
areas or on unstable surfaces.
Do not modify this radio for any reason.
Refer service to qualified licensed or certificated technicians
only.
Notice to the User:
· Government laws prohibit radio communication without
permission in government districts.
· Illegal operation is subject to punishment by fine and/or
imprisonment.
· Refer service to the well-trained professional technicians only.
Safety
It is important that the user is aware of and understands hazards
common to the operation of any radios.
Warning !
Your INTEK radio generates RF electromagnetic energy during
transmit mode. This radio is designed for and classified as “ Oc-
cupational Use Only” , meaning it must be used only during the
course of employment by individuals aware of the hazards, and
the ways to minimize such hazards. This radio is NOT intended
for use by the “ General Population” in an uncontrolled
environment.
This radio has been tested and complies with the FCC RF expo-
NOTICE !
It is recommended to carefully read this owner’s manual before using the
product. This will also help the user to prevent using the radio in violation
of the regulations valid in the country where the product is used, as well as
to avoid any possible interferences with other services.
NOTICE !
This transceiver is programmable via PC, using the dedicated software
and the PC interface cable (optional items). Any programming or modifi-
cation of the original default setting must be made by a specialised tech-
nician or by an authorised service centre. Some functions of this tran-
sceiver might be programmed in violation of the technical rules in force
for the use of the VHF and UHF FM bands. It is the user’s responsibility
to check that any modification to the programming will be done in com-
pliance with the current regulations. Any modification to the product, alte-
ration of the internal circuit, of the external structure of the radio or any
programming in violation of the current regulations will automatically void
the product certification and your right to use the product. INTEK S.R.L.
declines any responsibility concerning any modification of the product,
made by the user or by a third party, after delivery of the product.
NOTICE !
This transceiver has been factory pre-programmed, in order for the
user to test it right after purchase. It is the user' s responsibility to re-
program the radio, in accordance with the specifications for the fre-
quency channels assigned by the local authority.