User's Manual
Table Of Contents
- Ref. V10-122006
- Features
- Mullion Mounting
- Indications
- Connections
- Output protocols
- Security
- Specifications
- Timing
- Installation instruction
- Mullion Mounting
- Connector Assignments
- Tamper Switch
- Mounting tool
- Mounting Plate (Spacer)
- _
- _
- _
- © Copyright 2007
- Issue: May 2007 – This manual supercedes and rend
- The information in this manual has been put toget
- The installation recommendations contained in this manual assume the most favorable framework conditions. The manufacturer cannot guarantee that the system will function perfectly under other conditions.
- The manufacturer cannot guarantee that the information contained in this document is not protected by external property rights. The manufacturer is not granting licenses to its own or external patents or other property right.
- _
- _
- _
Cable Distance
Up to 153 meter (502 foot), depending on output
protocol and cable type. Recommended cable type:
stranded conductor with overall stranded shield or
equivalent
SIA recommended cable type for Wiegand signals
Cable Length Cable Diameter
inch
Diameter
mm
Up to 61m (200.1 ft) AWG22 0.025 0.64
Up to 91m (301.8 ft) AWG20 0.03 0.82
Up to 153m (502 ft) AWG18 0.04 1.02
Recommended cable for clock and data ABA track 2
emulation: Up to 25 meter (82 foot), AWG22.
Voh = Output Voltage idle high
Vol = Output Voltage active low
Wiegand Signal Levels
9