User's Manual
Table Of Contents
- Ref. V10-122006
- Features
- Mullion Mounting
- Indications
- Connections
- Output protocols
- Security
- Specifications
- Timing
- Installation instruction
- Mullion Mounting
- Connector Assignments
- Tamper Switch
- Mounting tool
- Mounting Plate (Spacer)
- _
- _
- _
- © Copyright 2007
- Issue: May 2007 – This manual supercedes and rend
- The information in this manual has been put toget
- The installation recommendations contained in this manual assume the most favorable framework conditions. The manufacturer cannot guarantee that the system will function perfectly under other conditions.
- The manufacturer cannot guarantee that the information contained in this document is not protected by external property rights. The manufacturer is not granting licenses to its own or external patents or other property right.
- _
- _
- _
The Smart ID Reader can be mounted on any surface
without relevant performance degradation. For
mounting on a metal surface a spacer is advised.
Our commitment is to bring non-propriety, open Radio
Frequent Identification (RFID) systems to the market
demonstrated with the Smart ID Reader Family.
Mullion Mounting
The Smart ID Readers can be mounted on a door
mullion.
Optional there is a mounting kit available in case the
small Smart ID reader will be mounted over a wall box
(mounting US back box, vertical 84 milimeter (3.31
inch), mounting European back box, horizontal 60
millimeter (2.36 inch)).
Indications
When a proximity card is decoded successfully the with
the card associated code is send to the Host system
and the buzzer sounds a short 3KHz beep. Both LED’s
and the buzzer are also controllable by the Host
system.
Connections
The Smart ID Reader Family has a flexible and reliable
connector interface. The space for the cable and the
connector within the Smart ID housing can be sealed
with silicone to withstand harsh environmental
conditions.
5