User's Manual

8
2.6 Appendix
2.6.1 SmartTOUCH
TM
Xtreme initialization sequence
When the reader starts it displays the following initialization sequence:
o Top LED blinks three times red.
o Bottom LED blinks three times green.
o Buzzer sounds while top LED lights red and bottom LED lights green.
o Top LED turns from red to green.
o Bottom LED turns from red to green.
o Both LEDs turn off and buzzer sounds.
2.6.2 SmartTOUCH
TM
Xtreme LED behavior
Mode/status Top LED Bottom LED Buzzer Remark
Access Mode
Wait for card Off Off
Read card Off Off
Wait for
finger
Off Green
Timeout Off Red Beep 3x Next state is
Wait for card.
Read finger Off Green
Finger
verified
Off Green Beep Transmit Card
ID. Next state
is Wait for card.
Finger
refused
Off Red Beep 3x No output. Next
state is Wait for
card.
Enrol mode: Present enrol card to switch to enrol mode.
Wait for
finger
Green Green blinking
Read finger Green Green Beep Beep 3x on
failure next
state is Wait for
finger.
Wait for card Green Red blinking Beep Beep 3x on
failure or
timeout next
state is always
Wait for finger.
Write
template
Green Red Next state is
Wait for finger.
Erase mode: Present erase card to switch to erase mode.
Wait for card Red Red blinking Beep 3x on
timeout. Next
state is Access
mode.
Erase Red Red
Erase
successful
Beep Next state is
Access mode.
Erase failed Beep 3x Next state is
Access mode.