User's Manual

6
Output protocols
The Smart ID Reader Family can operate with any
facility, system or card coding scheme. The output
format, contents and length are determined by the
personalization of the card or configuration of the
reader. Output formats like magstripe, Wiegand and
several others are available. The Wiegand output is
evaluated by UL.
The readers are intended for connection to a UL 294
Listed Access Control Panel where compatibility to the
reader is referenced in the control unit’s installation
instructions.
Security
Depending on the model and the RF technology used
the Smart ID Reader Family offers high security
challenge response schemes to protect the RFID air
interface against various attacks schemes like record &
playback attacks. This “security” feature has not been
evaluated by UL.
Specifications
Typical read range with an ISO Card
EM4102 up to 7.5 cm (2.9 inch) (not UL-listed)
Hitag1&2 up to 8 cm (3.2 inch) (not UL-listed)
ISO14443 up to 3 cm (1.2 inch) (UL-listed)
Legic up to 4 cm (1.6 inch) (not UL-listed)
ISO15693 up to 15 cm (5.9 inch) (not UL-listed)
DESFire up to 2 cm (0.8 inch) (UL-listed)
Power Supply
5 – 12 Volt DC