User's Manual

Features

The Smart ID Reader has a slim door style mountable

design to match any decor. The sunk LED’s and buzzer

allow the Smart ID Readers to be mounted indoors and

outdoors.

The Smart ID Reader accepts 5 to 12 Volts DC. The

reader output formats like clock-and-data magstripe

(ABA / ISO7811), Wiegand and a number of other

formats are determined by the personalization of the

card or configuration of the reader. The 5 Volt DC

capability allows the replacement of older reader

systems without rewiring or pulling new cables. The

Smart ID Reader offers high reliability, consistent read

characteristics and low power consumption.

Within the Smart ID Proximity Reader Family also

models with a RS232/RS422/RS485 interface are

available for read-only and read/write operations. The

RS232/RS422/RS485 have not been evaluated by UL.

The Smart ID Reader Family supports both the 125KHz

and 13.56MHz technologies. Different models are

available for EM4102, HiTAG1 and 2, Mifare, DESFire,

Legic and I·Code technology. (The pure 125kHz

variants of this reader, EM4102 and HiTAG 1&2, and

Legic have not been evaluated by UL. The ISO14443

variant is evaluated by UL)

Standard capabilities include Host system controlled

red and green LED’s and a buzzer.