User's Manual

4
Features
The Smart ID Reader has a slim door style mountable
design to match any decor. The sunk LED’s and buzzer
allow the Smart ID Readers to be mounted indoors and
outdoors.
The Smart ID Reader accepts 5 to 12 Volts DC. The
reader output formats like clock-and-data magstripe
(ABA / ISO7811), Wiegand and a number of other
formats are determined by the personalization of the
card or configuration of the reader. The 5 Volt DC
capability allows the replacement of older reader
systems without rewiring or pulling new cables. The
Smart ID Reader offers high reliability, consistent read
characteristics and low power consumption.
Within the Smart ID Proximity Reader Family also
models with a RS232/RS422/RS485 interface are
available for read-only and read/write operations. The
RS232/RS422/RS485 have not been evaluated by UL.
The Smart ID Reader Family supports both the 125KHz
and 13.56MHz technologies. Different models are
available for EM4102, HiTAG1 and 2, Mifare, DESFire
and I·Code technology. Standard capabilities include
Host system controlled red and green LED’s and a
buzzer.
The Smart ID Reader can be mounted on any surface
without relevant performance degradation. For
mounting on a metal surface a spacer is advised.
Our commitment is to bring non-propriety, open Radio
Frequent Identification (RFID) systems to the market
demonstrated with the Smart ID Reader Family.