User's Manual

EN
16
injury, use a 3.6 V, 750mAh battery (replacement
part number: 001-800369-30014).
RECYCLING NICKEL-METAL HYDRIDE
BATTERIES
Nickel-metal hydride batteries must be disposed of
properly.
Please take your used battery pack to a store
that recycles Ni-MH batteries.
An optional headset can be used with your
telephone for hands-free conversation.
To use a headset, plug it into the HEADSET jack
located on the side of the handset. When the
headset is connected, the handset earpiece and
microphone are disabled.
While the headset is connected, press TALK to
answer or place a call.
TIP : Use the belt clip for a real hands-free
conversation experience.
NOTE : Headsets are not included.
HEADSET JACK AND BELT CLIP
BELT CLIP
To attach the belt clip to the back of the handset:
1. Slide the belt clip over the back of the
handset until the ventilation holes are aligned.
2. Gently push the belt clip until it clicks into
place.
During the period that the power is off, you will
not be able to make or receive calls with the
telephone.
After a power outage, it may take a few seconds
for the handset to reconnect to the base unit.
POWER FAILURE
The following indicators show the status of a
message or of the phone:
BASE PAGING - Someone has pressed PAGE on
the base unit.
BUSY - The dialed number or handset is busy.
CALL ALL - An intercom call has been placed to
all registered handsets.
CALL BACK - A forwarded call was not answered.
CH - Remote sensor channel. The selected
channel number will display.
CHARGING - Battery is charging.
CONFERENCE CALL - 2 handsets are on a
conference call.
ENDED - The call has ended. The elapsed time
for the call also shows.
EXT IN USE- Another handset is already on an
external call.
EXTERNAL CALL - A call was received with no
Caller ID information provided.
FAIL - Registration did not occur.
H - A call has been placed on hold.
HI - Temperature is over 60 ° C.
IN - Indoor temperature is shown.
INTERNAL CALL HANDSET # / HANDSET NAME
- An intercom call has been placed from the
displayed handset.
MIC MUTE - The handset is in mute mode.
OUT - Outdoor temperature is shown.
PRIVATE # / NAME / CALLER - Some or all of the
Caller ID information was blocked.
READY - Phone is charged and ready to make or
receive calls.
TALK - Phone is in Talk mode ready to place a
call. If on a call, the duration of the call also
shows.
UNKNOWN # / NAME / CALLER - Some or all of
the Caller ID information was not sent with the
call.
FORWARD CALL - A call is being forwarded.
DELETE? - Prompt asking if you want to erase
the current Caller ID entry or a directory entry
that is shown on screen.
DELETE ALL? - Prompt asking if you want to
erase all Caller ID information.
MESSAGE WAITING - Caller has left a message
but you must subscribe to a voice mail service
offered by your local phone company for this to
work.
LCD SCREEN MESSAGES
TW339 manual_Eng 5.p65 3/5/05, 9:23 AM19