User's Manual

EN
To change an entry in the telephone book:
1. Press MENU/OK, then select “PHONE
BOOK” by pressing or .
2. Press MENU/OK.
3. Press or to select “RECALL”, then
press MENU/OK.
4. Press or , or enter the first character
of the desired name to find the desired
phonebook entry.
5. Press MENU/OK to edit the number, “STORE
NUMBER” will appear.
6. Press FLASH/DEL or to erase a digit.
Press and hold FLASH/DEL to erase the
entire number. Then enter the corect number.
7. Press MENU/OK to edit the name. “STORE
NAME” will appear.
8. Press FLASH/DEL or to erase a character.
Press and hold FLASH/DEL to erase the
entire name. Then enter the correct name.
9. Press MENU/OK to confirm that the change
has been saved.
CHANGING A STORED ENTRY
12
STORE CALLER ID ENTRIES IN
DIRECTORY
You can store received numbers into your
phonebook memory. Before you save an entry,
make sure the number appears in proper digits for
your dialing area. If not, change it using the
REDIAL/PAUSE key.
For example, if the Caller ID number appears 1-
416-222-5555, but it is not a long distance
number, press REDIAL/PAUSE key until it shows
416-222-5555 (without 1). The REDIAL/PAUSE key
lets you select how many digits of the number are
displayed:
• 7 = 7-digit telephone number.
• 10 = 3-digit area code + 7-digit telephone
number.
• 11 = 1-digit long distance code + 3-digit area
code + 7-digit telephone number.
To store caller ID entries in your directory:
1. Press in standby mode to enter call log
quickly.
2. Press or to select desired Caller ID
entry.
3. Press REDIAL/PAUSE to rearrange the
format of the number displayed.
4. Press MENU/OK. “STORE NUMBER” will
appear on screen.
5. Edit the number if necessary.
6. Press MENU/OK to edit the name. “STORE
NAME” will appear.
7. Edit the number if necessary.
8. Press MENU/OK to confirm the change. (A
beep wil sound to confirm the changes).
MULTI-HANDSET CONFIGURATION
The TW339H is shipped with 2 handsets (the
TW339 is shipped with one handset only) and can
work with up to 4. To purchase additional
handsets, please check the place of purchase for
more information.
TO REGISTER A NEW HANDSET
The original handset(s) received with your base
unit and the cradle are automatically registered
the first time you set up the telephone. You can
add up to 2 additional handsets by registering
them with the base unit.
NOTE : If you register a handset to more than
one base, you will need to rename the handset for
that base. Otherwise, the base will recognize it as
“Handset 1”.
To register a new handset:
1. Press the MENU/OK key.
2. Press or to select “REGISTER”, and
then press MENU/OK to choose it.
3. When the handset display shows “PLEASE
WAIT”, press and hold PAGE on the base unit
until the orange in-use LED flashes quickly.
4. If the registration is successful, “SUCCESS”
will show on the handset display.
NOTE : If the registration is unsuccessful, “FAIL”
will show on the handset display. In this case, you
should try again.
TW339 manual_Eng 5.p65 3/5/05, 9:23 AM15