User's Manual

17
Caller ID list
The incoming caller information transmitted from the phone company is received
by your phone between the rst and second ring and stored in the Caller ID list.
If you answer a call before the second ring the caller information may not be
stored.
When the Caller ID list memory is full, a new call automatically replaces the
oldest call in memory. NEW appears on screen for calls received that have not
been reviewed.
Note: Check with your local phone company regarding name service
availability.
Reviewing Caller ID list
As calls are received and stored, the Caller ID list is updated to let you know
how many calls have been received.
1. Press
CID/VOL to scroll through the Caller ID list from the most recent to
the oldest.
2. Press
CID/VOL to scroll through the Caller ID list from the oldest to the
most recent.
3. Press
TONE/EXIT to return to Standby Mode anytime.
Note: 1. If area code is programmed (for example 416), the whole number
(
416-2225555) including area code will be shown on the screen during a call
coming from this area. When reviewed later, the area code will not be shown
(i.e. LCD shows
2225555 only). 2. You may also transfer Caller ID entries to
the directory.
See
Storing caller ID entries in directory below.
Format Caller ID numbers
The MUTE/FORMAT key lets you select how many digits of the number are
displayed.
• Press
MUTE/FORMAT once to add the area code (Note: The programmed
area code must match the Caller ID area code).
• Press
MUTE/FORMAT again to add 1 plus the area code.
• Press
MUTE/FORMAT a third time to go back to the 7-digit number.
manual-en-pm5851-re1.indd 17 2006/9/7 19:02:19