User's Manual

EN
32
“I’m having problems registering a new handset.”
• Unplug and plug in again the main power cord of the base unit to
activate the registration procedure.
• Make sure you have selected a base number that is not already
assigned, and ensure you choose from the base numbers that are not
flashing.
• The base unit may have already registered all 2 handsets. You need
to de-register (delete) one of them before registering a new handset.
• If you are replacing a faulty handset, make sure you have de-regis-
tered the faulty one before registering the new one.
“I cannot make a call.”
• Only one outside call and one intercom call can take place at once.
Make sure no other handset user is already on a call.
• Please check if another handset has engaged the line already. If this
is the case you will see
on your handset.
• The contents of this manual and technical specification are subject
to change without notice.
• Due to printing limitations, pictures and displays showed in this manual
may be slightly different from the real one.
• The contents of this manual may not be reproduced without the
permission of the manufacturer.
• In case a Ni-Cadmium rechargeable battery is used, the draining of
its contents should be done in accordance to the law re: special
waste material.
MULTI-HANDSET USE
WARNING