User's Manual

You can transfer an external call from one handset to another.

1. During an external phone conversation, press INT. Your caller will be

put on hold.

2.Type in the handset number (1-2) to which you want the call transferred.

3. The paged handset will ring and “INT CALL” will appear on the

display.

4. To answer the call on the paged handset, press TALK.

5. Press TALK on the paging handset to transfer the call.

NOTE: If the other handset does not answer, press INT to end the intercom

call and get back to the external line. Pressing TALK will end both the

intercom call and the external call.

The handset and base unit are factory pre-registered with each other.

Therefore, the unit should be in full working order out of the box.

When you purchase an additional handset, you have to register it to the

base unit in order to make and answer calls.

You can register up to 1 more handsets to make and answer calls via the

same base unit. Handsets are numbered 1 to 2.

To register a new handset:

1. On the handset, press MENU.

2. Use the ARROW KEYS to select “Handset Setting”, then press MENU.

3. Select “Registration”, then press MENU.

4. Select “Yes”, then press MENU.

5. You will see the message: “REGISTERING”. Press and hold the PAGE

key on the cradle of the base unit.

6. When the registration is complete “OK” will appear on the screen.

NOTE: The base unit will then send a signal to the handset registering

the handset to the base unit. Once the Registration function has been

completed, the handset will return to Standby Mode.

CALL TRANSFER BETWEEN HANDSETS

REGISTERING HANDSETS TO BASE UNIT