User's Manual

To turn the rainbow pattern off, follow steps 1-4 above but select “OFF”

instead of a pattern at step 4.

NOTE: When the phone is in Talk Mode, the rainbow pattern will turn off.

To use the base unit as a mirror:

1. Make sure the base unit is in Standby Mode, then press MENU for 3

seconds.

2. The display will say, “Going to off for 1 minute” and will then turn off

for 1 minute.

3. After 1 minute the display will return to normal Standby Mode, or you

can press any key to exit Mirror Mode.

Your base unit can synchronize with up to 2 handsets. If you have

multiple handsets registered with the base, 2 handsets can make inter-

com calls.

1.Press INT on your handset.

2.Type in the number of the handset (1-2) that you want to reach.

3. The paged handset will ring. The display of the paged handset will

show “INT CALL”.

NOTE: To cancel the intercom call, press TALK.

1. Press TALK to answer an intercom call.

2. Press TALK again to end the intercom call.

If an external call comes in during an intercom conversation, you will hear

a call waiting tone.

1. To end an intercom call, press TALK.

2. The external line will ring. Press TALK again to answer the external

call.

SETTING THE BASE UNIT TO MIRROR MODE

USING MULTIPLE HANDSETS

INTERCOM CALLING BETWEEN HANDSETS

ANSWERING INTERCOM CALLS

CALL WAITING