User's Manual

EN
13
• Avoid interference such as TV or other electrical appliances.
If your handset is out of range of the base unit, or the signal is interrupted
due to electrical interference, the range symbol
starts flashing and
the handset will return to Standby Mode.
IMPORTANT Due to radio interference in the environment, occasional
loss of synchronization between the handset and base may occur for a
very short duration. The base will very quickly change to another chan-
nel automatically to overcome the interference and restore synchronization.
SYMBOL MEANING
- Within range indicator
- Flashing when out of range
Ringer is set to off
Line-in-use
Missed call
- Battery (5 levels)
- Flashing when battery is low (level 1
)
ELECTRICAL SAFETY
Do not install the base unit near a sink, bath or shower, or anywhere else
where it could get wet. Electrical equipment can cause serious injury if
used while you are wet or standing in water.
• If the base unit ever falls into water, do not retrieve it until you have
unplugged the power lead from the mains and the phone line plug from
the phone socket; then pull it out by the unplugged cables.
• Never use your phone in the open air during a thunderstorm – unplug
the base unit from the phone line and the main socket when there are
storms in your area. Damage caused to your phone by lightning is not
covered by the guarantee.
HANDSET LCD SYMBOLS