User's Manual

Before using the handset, charge it for at least 15 hours. If you do not do

this, the battery life will be reduced.

To charge the handset:

1. Place the handset in the base unit cradle with the keypad facing

down.

2. The base charge symbol

will come on to indicate the handset is

charging.

When the battery is fully charged, the handset battery indicator will show

the battery full symbol in the top right of the LCD display.

NOTE: If you charge the battery for longer than the specified time or let

it run too low, too often, you will reduce the battery life.

When the battery is low and has only 15 minutes of talk time left, the

handset will beep a warning tone and the LCD display will flash “Low

Battery”, please:

• End the call as soon as possible.

• Don’t use the Speakerphone Mode for conversation since this will

further reduce the talk time.

• Put the handset back on the charger until the battery symbol returns

to high level.

NOTE: Please note that when the handset battery is low, the backlight will

not turn on.

Usually, a loss of reception means you are too far from the base unit, or

there is interference between the two units. Make sure to:

• Stay within a range of 984 feet (300 meters) from the base unit

while using the handset.

CHARGING HANDSET BATTERIES

LOW BATTERY WARNING

HANDSET RECEPTION