User's Manual

GETTING STARTED

CONNECTING AC ADAPTOR / PHONE LINE

Connect the AC adaptor and phone line to the base unit and wall sockets

as shown below.

INSTALLING HANDSET BATTERIES

Your handset uses a 3.6V 750mAh Nickel Metal Hydride rechargeable

battery, which will already be installed in your handset.

If you need to replace the handset battery, simply:

1.Slide the cover off.

2. Insert the rechargeable battery by putting the piece at the end of the

wire into the bottom right of the battery indention on the handset.

3. Slide the cover up so that it clicks firmly into place.

Rest the handset in the handset cradle on the base unit to charge. Once

plugged in, allow the handset to charge for 15 hours before using.