User's Manual

USING MUTE

During a conversation, press Mute to

toggle the microphone, to mute or un-

mute status. The status of the micro-

phone will be display on the bottom left

corner.

USING PRE-DIAL

The pre-dial function allows you to enter

the number, check, and edit the number

before you press Talk to make the call.

The numbers are displayed in large fonts

for easier reading.

1. In standby mode, enter a number by using numeric keypad. If you make a

mistake, press DEL to erase.

2. Press Talk to start dialing.

3. Press and hold DEL to clear all numbers and return to standby mode.

Press Redial to dial the last number you entered.

NOTE: You enter more than 34 digits in pre dial mode or press Flash during a call,

the redial memory will be erased.

REDIALING NUMBER

USING THE PAUSE

In some phone systems, you must dial

an access code (9, for example) and

wait for a second dial tone before

dialing an outside number. When you

manually dial a number or you store a

number in memory, you can have your

telephone pause anywhere during a dial

sequence. Press Redial/Pause at the desired location.

In pre-dial or post-dial mode, a one second dial pause is inserted by pressing

the Pause. It is indicated by a “P” in dial string.