Owner's Manual

59
Basic Operation
—Continued
The following table lists all the listening modes and shows which modes can be selected for each input signal format.
Input signal format
Analog,
PCM*1
1. In the Pure Audio and Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and 96 kHz respec-
tively. 96 kHz signals are processed at 48 kHz for all listening modes other than Pure Audio, Direct, and Stereo.
Dolby D
DTS/DTS 96/24*2
2. In the Pure Audio, Direct, Stereo, and DTS 96/24 listening modes, signals are processed as DTS 96/24. Everything else processed as DTS.
Multich
*/2 2/0 1/0,1+1 Other */2 2/0
1/0,
1+1
Other
DTS-
ES
Source
CD, TV, LD,
VHS, MD,
turntable,
radio,
cassette,
DTV, etc.
DVD, DTV, etc. DVD, LD, CD, etc. DVD
Listening mode
Pure Audio
❍❍❍❍
❍❍
Direct
Stereo
❍❍
❍❍
❍❍
*3
3. DTR-6.5 only.
Mono
*3
PLIIx Movie/Music/Game *4
4. If the SurrBack parameter is set to “None,” or the Zone 2 speakers are being used, PLII is used.
❍❍
Neo:6 Cinema
Neo:6 Music *5
5. Available only when Surround speakers are connected.
❍❍
Dolby D
Dolby D EX *6
6. Cannot be selected if the SurrBack parameter is set to “None” or the Zone 2 speakers are being used.
Dolby D+PLIIx Movie *7
7. Cannot select if the SurrBack ch setting is not set to “2ch,” or the Zone 2 speakers are being used.
Dolby D+PLIIx Music *6
DTS, DTS 96/24
*8
8. If the SurrBack setting is set to “None,” or the Zone 2 speakers are being used, DTS is used.
DTS+Neo:6 *6
DTS+Dolby EX *6
DTS+PLIIx Movie *7, Music *6
DTS-ES Discrete *6
Discrete
DTS-ES Matrix *6
Matrix
Multich
Multich+Dolby EX *6
*3
Multich+PLIIx Movie *7, Music *6
*3
*9 PLIIx+THX Cinema *4
9. DTR-6.5 only.
❍❍
*9 Neo:6+THX Cinema
*9 THX Cinema
❍❍❍❍
*8
*3
*9 THX SurrEX *6
*3
*9 PLIIx+THX Cinema *7
❍❍
*3
*9 DTS+Neo:6+THX Cinema *6
*9 DTS-ES+THX Cinema *6
Mono Movie
*3
Enhance
Orchestra
Unplugged
Studio-Mix
TV Logic
All Ch Stereo
❍❍❍❍❍❍❍❍
*3
Full Mono
*3
Theater-Dimensional
❍❍❍❍❍❍❍❍
*3
DTR-6.5,5.5_En.book Page 59 Wednesday, July 28, 2004 9:07 AM